Click here to home!

Grinder Series:
  WFJ SERIES FINE GRINDER /MODEL CWFJ SERIES SUPER FINE GRINDER
30B-C HIGH EFFECTIVE AND UNIVERSAL GRAINDER SET
PSJ-500 CRUSHER/WJF-400 WORM GRINDER
CSJ SERIES ROUGHNESS GRINDER
QLF FLUIDIZED-BED PNEUMATIC JET MILL

 

WFJ SERIES FINE GRINDER /MODEL CWFJ SERIES SUPER FINE GRINDER

Go top

 

MAIN APPLICATIONS AND ITS FEATURES

Model WFJ series fine grinder or Model CWFJ series super fine grinder consists of three parts i.e. main machine, auxiliary machine and electric control. Its features are compact in design, reasonable in structure. Its principle is using air to chose and no sieve or screen. Being installed grading mechanism inside the machine, the crushing and grading can be finished at the same time. When use negative pressure to transport in the operation of crushing, the heat produced from the chamber will be removed continuously. Therefore it can also be suitable for crushing thermal sensitive raw materials. The scope of application of machine is wide. Its productive process is continuous and its size of granule can be adjusted. It can crush and grade many raw materials such as chemicals, foodstuff, medicines, cosmetic, dyestuff, resin, shell materials and so on.

 

MAIN TECHNICAL PARAMETERS FOR WFJ SERIES :

Specification and model

WFJ-15

WFJ-18

WFJ-36

WFJ-60

Productive capacity(kg/h)

10~200

20~450

60~1000

100~1500

Size of raw material to be fed (mm)

<10

<12

<15

<18

Size of raw material to be discharged (mesh)

80~320

80~450

80~450

80~450

Total power (kw)

13.7

19.07

38.85

65.2

Main revolution (r/min)

4500

4480

4000

4000

Overall dimensions

(LXWXH) (mm)

5410x1660x2500

5500x1800x3100

9000x2200x3100

9000x2700x5280



MAIN TECHNICAL PARAMETERS FOR CWFJ SERIES :

Specification and model

CWFJ-15

CWFJ-18

CWFJ-36

CWFJ-60

Productive capacity(kg/h)

10~200

20~450

60~1000

100~1500

Size of raw material to be fed (mm)

<10

<12

<15

<18

Size of raw material to be discharged (mesh)

120~1400

120~1400

120~1400

120~1400

Total power (kw)

18.67

31.47

46

76.7

Overall dimensions

(LXWXH) (mm)

5410x2130x2500

5500x2500x3100

9000x2800x4000

9000x3000x5280

Notes:
1.The parameters listed in above table have more difference with different raw materials, therefore the output and size of raw material to be discharged have different too.
2.The air compressor used for pulse bag duster should be prepared by customer.

 

 

 

30B-C HIGH EFFECTIVE AND UNIVERSAL GRAINDER SET

Go top

  PRINCIPLE OF STRUCTURE AND ITS FUNCTION
The grinder set consists of Model 30B grinder, EXC collector of raw material and ESC collective duster. It solves the problem, i.e. the dust is flying during the period of crushing raw material.
The principle of work is as follows: after raw material is fed into the crushing chamber, it undertakes the comprehensive actions such as impacted by teeth, shearing force, friction force, impacted between raw materials, finally the raw materials raw materials are crushed. Through sieving. The needed powder can be got.
The grinder, collector of raw material and ESC collective duster are all made of stainless steel and are in conformity with the requirements of GMP.

TECHNICAL PARAMETERS

Model

20B-C

30B-C

40B-C

Capacity (kg/h)

60~150

100~300

160~800

Revolution of spindle (r/min)

4500

3800

3400

Size of fed material (mm)

6

10

12

Size of Grinded material (mesh)

60~120

60~120

60~120

Size of Grinding Motor (kw)

4

5.5

11

Power of  Dustcatching Motor (kw)

1.5

1.5

1.5

Overall dimensions(LxWxH) (model A mm)

100x600x1650

1240x720x1650

1350x750x1850

Notes:the output listed in the table will be different with diferent raw material, for reference only.

 

PSJ-500 CRUSHER/WJF-400 WORM GRINDER

Go top

  MODEL PSJ-500 CRUSHER
PRINCIPLE OF STRUCTURE AND ITS APPLICATIONS
The crushing is realized through the shearing action between rows of knives and grid on the double shaft. It makes filtering cake or caked raw material caused by damp to crush. The crushing size can be adjusted through control revolution of double shafts. This machine is suitable fir crushing incompact and caked raw material. It provides the first procedure to dry and crush raw material.

















TECHNICAL PARAMETERS

Specification

Power

Speed of shaft

Output

Weight

PSJ-500

1.5

20-160(adjustable)

200-500

500

 
WJF-400 WORM GRINDER
APPLICATIONS
The grinder is used for medicine porcessing and also used for grain, solid chemicals, coal powder, pig iron powder processing as well.

TECHNICAL PARAMETERS

Revolving Speed of Shaft

rpm

3000

Capacity of Evntilator

m/h

1238

Degree of Grinding

mesh

140-120

Productivity

Kg/h

25-80

Epuipped Motors

Kw

Y180M-2-22

Overall Dimension

mm

1200×600×750

Weight

Kg

800

 

CSJ SERIES ROUGHNESS GRINDER

Go top

  APPLICATIONS
This machine is suitable for many industries such as pharmaceutical industry, chemical industry, metallurgy industry, foodstuff industry, architecture industry and so on For the grinding process of hard material which is difficult to be grinded, including the grinding of plastics and tree roots, it can also be used as the completing equipment for the preceding process of fine grinding.,

FEATURES AND PRINCIPLE OF WORK
Being adopted a horizontal structure, main shaft is supported by the rolling bearings, and 12 pieces  of cutters are assembled on the shaft. Inside of the casing of the machine, there is equipped a fixed cutter. The rotating cutters rotate speedily in the casing to exert speedy shearing to the material as to reach the grinding  objective. The material is sheared and grinded by the rotating cutters and the fixed cutter. The material will flow to the outlet of the machine automatically.

TECHNICAL PARAMETERS

Model

CSJ250

CSJ500

Inlet material diameter (mm)

100

100

Output diameter (mesh)

2~30

2~30

Speed of shaft (r.pm)

560

560

Power (KW)

2.2

3

Output (Kg/H)

100~250

100~500

Notes:the output listed in the table will be different with diferent raw materials, for reference only.

 

QLF FLUIDIZED-BED PNEUMATIC JET MILL

Go top

  PRINCIPLE OF WORK
The fluidized-bed pneumatic jet mill is such a device as using the high-speed air flow to perform the dry-type superfine pulverizing. It consists of milling nozzle, grading rotator the screw feeder.The material enters the milling chamber through the screw feeder,where the high-pressure air is activating the high-speed injection by means of special ultrasonic nozzle. Therefore, the materials will be grinded by being accelerated, impacted and collided repeatedly in the merging area ultrasonic injection Flow. The grinded materials will brought together with the upflow to the grading chamber. The centrifugal force produced by the fast rotation of grading rotator together with the centrifugal force by the pneumatic adhesion act on the grading grains, When the centrifugal force on the grain is greater than the centrifugal force, the coarser grains above the gradlng range will be swirled back to the milling chamber for further milling. The thinner grains below the grading range will be blasted to cyclone separatorand collector, whereas the purified air will be vented outside from the draft.
 
FEATURES
Energy-effective: Saving 30%-40% over the Equivalents.
◆ Endurance:Applied to materials with Mohs' Hardness below Grade 9, since the milling effect only involves the impact and collision among the grains rather than the collision with the wall.
◆ Wide Grading Range: d97=2-15 um.
◆ Compact Internal Structure to form the Closed circuit Milling.
Accessible Maimtenance, the imported converter will auto maticauy control the whole grading process.
◆ lnert gas can be used as media for milling of flare mable and expIosive materials.

APPLICATION SCOPE
It is widely applied to superfine pulverizing for pnonm etallic ores,talcum, barite, kaolin, quartz, graphite fire retardant materials,high-grade grinding media, chemical, smelt, pharmacy, traditional Chinese medicine, agricultural chemical and ceramics, as well as for such dry powders as highly adhesive and superfine pesticides
FLOW CHART OF QLF FLUIDIZED-BED PNEUMATIC JET MILL

Modal/Params

QLF-150

QLF-260

QLF-400

QLF-500

QLF-720

QLF-800

Capacity(kg/h)

5-100

50-200

80-380

200-500

400-1000

600-1500

Air Consumption(m/min)

3

6

10

20

40

60

Feed Diameter(mesh)

100~325

100~325

100~325

100~325

100~325

100~325

grinding Sized

2~15

2~15

2~15

2~15

2~15

2~15

energy Consumption Power(kw)

22

37

65

132

264

396

 

© 2005 Suntin MediPharma Co. Ltd. All rights reserved.

H.K.ADD.: RM. 1213, World-wide industrial centre, No. 43-47 Shan Mei Street, Fotan, New Territories, HongKong.
Tel: +852 2690 9351 
Fax: +852 2690 9356
Email:sales@suntinpharma.com
Shenzhen Office: RM.2501-2502, 25/F., Convention & Exhibition Times Center, 3008 Yitian RD., Shenzhen China.
Tel: +86 755 8386 5062 
Fax:  +86 755 8386 4173
Web:  http://www.suntinpharma.com