Click here to home!

Blister machine series 

DPP-250D(D) Automatic Blister Packing Machine
DPP-350DAutomatic Blister Packing Machine
DPP-130C Plate Type AL/PL AL/AL Blister Packing Machine
DPT-70B Type MINIAL/PL Blister Packing Machine
DPH-220A Type High-Speed Blister Packing Machine
DHC-250A/B medicine Packing automatic production line
DZB-250E Type Multi-Purpose Automatic Packing Machine
DPR-320A Tropical(al/pl/al) Blister Packager
DPR-250T Tropical(al/pl/al) Blister Packager
DPR-160A Tropical(al/pl/al) Blister Packager
DPP-320 Blister Packager
DPP-140D Blister Packager
GBZ-130C Automatic Packager
GBZ-300A Automatic Packager
Series of  YJD  Capsule Directional Head-Turned Machine

DPP-250D(D)Automatic Blister Packing Machine

Go top

INTRODUCTION
    DPP-250D(D) AL-PL,AL-AL(AL-PL-AL)Plate model Blister Packing Machine adopts frequency timing and machine,electronic,light and air automatic control technology and strictly conforms to"GMP" standard,bring forth-new ideas in design on the basis of original DPP-250C model, with adjusting stroke, photoelectric register, of station die blocky, AL-PL, AL-AL,AL-PL-AL three functions. The machine is belongs to split combination model,can enter into elevator of 1.5m and finished separately cleaning workshop.
    National level authoritative person evaluated the machine again in 2000:that conforms to "GMP" standard and concerned technology filling the gap of home, the combination performance is the lead of home. And listed into "National Grade Torch Plan" in 2002.
    It adopts mechanically-drive,pneumatic control, orientate the capsule in a sequence according to different colors, with an international lead in running speed and the rate of orientation and the rate of correction reach to 99.9%.
    It can manufacture according to the size of sheet that the customer required, and equip with all kinds of blister packing machine.   


SPECIFICATIONS
    Adopts manipulator grip(pneumatic) feeding mechanism, adjustable stroke equipped with micro-adjustable device, guarantee synchronous correct.
   Air-cushion heat-sealing:when the machine stop,the cylider lifts automatically the net plate thus elimination the blister deformation caused by heat radiation during staying of PVC, and playing a role of slowing down super pressure for the benefit of extension of its service life.
   AL-AL package: there is mechanical forming structure, equipped with vibrating feeding or feeding model charging device and lacking of ablets monitor device.(Patent No.:98247588.8)
    Working station die blocky:integrate working assembling, guarantee precision, all work station can remove through scale hand-wheel according to the size required to make removing mould and adjusting stroke easily.
    D Model:lengthen the machine body,can satisfy filling several medicines in one sheet,and can increase work station to realize special requirement of AL-PL-AL package.
    Smooth coordinated flow-lines of plate mould, positive forming, automatic filling, capsule orientating, unfilled tablet checking, reject automatically, photoelectric register, upper and lower cobweb, press trace and cutting line, printing batch number,(steel word, color belt printing) no-side blanding and automatic alarm of PVC pieces finished or broken and automatic stopping etc. crafts smooth and object process of product.
    The common machine model adopts touch control panel sleek design, easy to operate.
    Planet model general speed regulation charging device:the rate of the usually feeding reach to 99% for capsule, tablets (patent No.:88207598.5)
      Can design special feeding device:satisfied for filling special. Tablets and filling several kinds of medicines in one sheet.

TECHNICAL PARAMETERS

Punch Frequency:AL-PL20-40times/min AL-AL(AL-PL-AL) 15-25times/min (Frequency speed regulation)

Productivity:AL-PL 100-300 thousand pieces/hour AL-AL 40-100 thousand pieces/hour

Range of working travel:30-120mm

Max.forming area and forming depth:AL-PL 24511218mm AL-AL24511212mm

Power: Three phases four wires 380v 50HZ(220v 60HZ)

Total power:5.7kw

Packaging material

PVC2500.25(0.15-0.5)mm
2500.15(0.10-0.18)mm
PTP:2500.02mm

Note:the width of packaging material 130-260mm

Overall dimension of machine(LWH):27206501560mm

(D model increase 1000mm)

Dimension of packaging case for separate parts:14608301800mm2(Model D3)

Weight:1200kg(D1500kg)

Air compressor:0.38m3/min Self-prepared

DPP-350DAutomatic Blister Packing Machine

Go top

INTRODUCTION
    Same as DPP-250D(D)

SPECIFICATIONS
    Assembly of units separated from overall unit. The structure and performance are similar to the DPP-250DII model. This model is suitable for packing larger size and special shape AL-PL and Paper/Plastic blister, such as large honey pills, injectors, oral liquid and food, medical appliance etc.
    Adopts jar shape blister for injectors, ampoule and oral liquid, locking the material as the shape of mouth smaller and inner bigger, reach to the usage of proof vibrating (Patent No.:95204869.8, 95205701.8). Can equipped with automatic feeding device and ampoule printing device.
    As special shape article need to feed by hand, it can increase the length of the working table to 1 meter or so.(350DIII model)


TECHNICAL PARAMETERS

Capacity: 10-35times/min 2ml ampoule pieces/sheet sheets/time pieces/hour

Forming area and depth:34015035mm

Range of adjustable stroke:40-160mm

PVC width:350mm  thickness:0.2-0.6mm

power:380V 50HZ(220V 60HZ)

Total power:6.8KW

Dimensions of machine (LWH):27206501560mm

Dimensions of packing case:28208301800mm

Separate packing case size:14608301800mm2

Net weight:1500kg

Air compressor:0.5m3/min

DPP-130C Plate Type AL/PL AL/AL Blister Packing Machine

Go top

INTRODUCTION
    The same function and character with 250 model: frequency control, adjustable stoke, touch heating, positive forming, capsule orientating, photoelectric register, air-cushion heat sealing, and net plate.
    It is suitable for small and medium size pharmaceutical factory packing capsule, tablets (irregular tablets), pill etc of small batches and more variety production.

SPECIFICATIONS

TECHNICAL PARAMETERS

Punch Frequency:15-35time min 2sheets/time

Production Capacity:50-90 thous pcs/h

Adjustable Range of Stroke:40-110mm

Air Compressor :0.2m3/min 1.5kw(Self-provided)

Total Power :380V 50HZ 3.2kw(220V 60HZ 3.2kw)

Weight :650kg

Overall Dimensions:22605701380mm

Size of packing box :23407501600

DPT-70B Type MINIAL/PL Blister Packing Machine

Go top

INTRODUCTION

SPECIFICATIONS
   With the advantages such as small volume, lighter weight, easy to operate, adjustable stroke and easy to operate, adjustable stroke and easy to replace the mould and so on.
    It is suitable for research institute and preparation room in hospital to packing capsules, tablets and similar material through blister-type compound sealing with AL/PL.

TECHNICAL PARAMETERS

Production Capacity:20-40 thous pcs/h

Vacuum Pump:XD-010(10m3/h)

Punch Frequency:30time/min  1 sheets/time

Weight:175kg

Total Power:220V 50HZ 1.8KW

Overall Dimensions:1100560950mm

DPH-220A Type High-Speed Blister Packing Machine

Go top

INTRODUCTION
    The model is a kind of high property medicine packing machine that our company put out in the new century, improves the efficiency and cut down the cost, to provide the new choice for pharmaceutical industry packing capsules, tablets on scale.

SPECIFICATIONS
    Adopts plate die, positive forming, suitable for the different specification of all kinds of sheets.
   Adopts cylinder type heat-sealing, photoelectric location, ensure accurate synchronization.
   Adopts without waster edge punching of across type that can save the charge of material of RMB200000 or so every year.
   Finished product ejecting horizontally: supply convenience for equip with encasing machine.

TECHNICAL PARAMETERS

Productivity0#3# capsule(packing in order)160220 thousand pieces/hour
613 tablet:2060 thousand pieces/hour (sheets/time)

Punching Frequency:3560509060120 time/min (3 shifts)

Setting the times of blanking according to the condition of filling material

Total Power:380V 50HZ (220V 60HZ)  9KW

Weight of machine:2000kg

Air compressor:0.4m3/min(Self-prepared)

Overall Dimensions (LWH):31009001550mm

Size of packing box(LWH):335010501800mm

Size of packing boxLWH):150010001600mm    180010001600mm

DHC-250A/B medicine Packing automatic production line

Go top

INTRODUCTION
   DHC-250A: is connect with some single machines. It can reform The blister packing machine which has purchased by customer or purchase blister packing machine first, then connecting in future. The nest encasing equipments can be installed outside the cleaning workshop.
   DHC-25B is forming system connecting equipments. All the functions can finished together.
   Above two models all can separately transport. It can enter into elevator of 1.5m and finished cleaning workshop. 
   DHC-250 Medicine Packing Connect Line is consist of blister packing machine model DPP-250DII(DIII), photograph checking system on line, link machine, automatic encasing machine type ZH90, etc.
   It accomplishes following actions automatically: blister packing, unfilled tablet detecting, rejecting, directions folded and folded together with the blister plate.
   Automatic rejecting for un-encasing blister plate and directions and automatic waiting without blister plate.
   Each unit of equipment has independent dynamic source and PLC control system, which has perfect function and reliable running.
   One blister packing machine can equips several encasing machines, it can improve the capacity greatly if theres only one blister in one box.

   Suitable for automatic packing produce with medicine, sanitarian, and food etc.


SPECIFICATIONS

TECHNICAL PARAMETERS
Max. Capacity : 90 boxes/min

Power: 3-phases 4-wires 380V 50HZ (subject to customer's order)   Total Power:8KW

Water Consumption:0.2m3/hour (can be supplied with cycle water cooler)

Dimension(LWH):650013001560mm  Total Weight:2500kg

Non-oil Air Compressor(arranged by user):Press 0.8Mpa   Air Exhaust:25m3/hour    (reference specification;  WW-0.6/7 Power:5.5kw)

Model DHC-250A Model DHC-250B

DZB-250E Type Multi-Purpose Automatic Packing Machine

Go top

INTRODUCTION
    The DZB-250E Multipurpose Automatic packaging machine is used in the pharmaceutical industry for repackaging of aluminum-plastic pharmaceutical items. It has a much improved moisture protection function and an enhanced ability to protect packaged contents from exposure to light. The machine can also be used to package food items.

SPECIFICATIONS
   Adopts frequency speed, regulation and equipped with a PLC control system.
   Manipulate on the display screen directly and automatic adjust the package length.
   Photoelectric register of images and words.
   It is suitable for packing different AL-PL medicine sheet.
   Solid ink roller is used for printing the serial number.

TECHNICAL PARAMETERS

Operational capacity:30-110packets per minute
Depending on the packing article and material

Voltage:220V

Frequency:50HZ

Power:2KW

Weight:700Kg

Dimensions of packages:L=60-110mm W=5-30mm H=30-110mm

Dimensions of machine:51009001500mm(LWH)

Split packing:310010001600mm 21005501000mm

DPR-320A Tropical(al/pl/al) Blister Packager

Go top

INTRODUCTION
    DPR-320A Tropical (AL/PL/AL) Blister Packing machine is invented on the basis of national-level key new products and also adopted three domestic patents (patent No, 01239101.8, 01239100.x). Moreover it won the third-class award of scientific and technological progress of Rui'an city. These not only improve the technical level and capability, but make the packaging further perfect: Characters are following:
(1) Transmission organization: Adopt the most new-type high-power transmission to arrange the chain and drive the main drive shaft, has avoided the errors and noises of its gear wheel transmission.
(2) Electric apparatus system: Adopting German Siemens PLC controlling system result in that every engineer location of transmission of the machine is procedure.
(3) Detection system: adopt video detector that can modify of the 5% different pharmaceutical sample of the shape and delete it automatically, or adopt the digital calculating equipment of the optic fibre that can detect the number of medicines.
(4) Pneumatic system: Adopt photo electricity control and can program with PLC that make every organization of operation accurate, also enable packing the products in many worker's location and the operation at a long distance. It guarantees the stability of moving ahead simultaneously.
(5) Photoelectric equipment: Using photoelectric indexing device makes to be clear and pleasing to print pictures and texts, and improve the level of the packing of products.
(6)Combined body: it is convenient to enter the purification workshop already fitted up smoothly for the user.
(7)Two-way boundless blanking organization vertically and horizontally: Adopt this patented technology, can economize 5% of the packing cost for users and economize about 400,000 Yuan of wrappings every year.
(8)All the parts is made of stainless steel and prevent the across infect which can meet the "GMP" standard. 

SPECIFICATIONS

TECHNICAL PARAMETERS

 Ltem

 Unit

Specification

 Productivity

Pieces/h

40000-80000

 Cutting frequency

Times/min

5-25teplessly adjustable)

 Travel adjusting range

mm

40-130

Max. of forming area and depth of PVC

mm

30012014

Max. of tropic Aluminum forming area and depth

mm

28011015

Heating plate power

KW

1.5(down),1.5up

Hot-sealing power of Alum.-Plastic

KW

3

Hot-sealing power of tropic Aluminum

KW

7

Power of main motor

KW

2.2

Capacity of air compressor

m3/min

0.2

Size of wrapper(width)

PVC

mm

305

PTP Alum. foil PTP

mm

305

Tropic Aluminum

mm

305

Weight

kg

2000

Overall size

mm

51007501600

Size of encasement

mm

28007501600

mm

23007501600

DPR-250T Tropical(al/pl/al) Blister Packager

Go top

INTRODUCTION
    DPR-250 Tropical (AL/PL/AL) Blister Packager got two patents from the state. It can be used for different packaging of three kinds of material: AL/PL, AL/AL, AL/PL/AL and up to the purpose that a machine three uses.
   Characters are following:
   (1)Transmission organization: Adopt the most new-type high-power transmission to arrange the chain and drive the main drive shaft, has avoided the errors and noises of its gear wheel transmission.
   (2)Electric apparatus system: Adopting PLC control system of German Siemens result in that every engineer location of transmission of the machine is in procedure.
   (3)Detection system: adopt video detector that can modify of the 5% different pharmaceutical sample of the shape and delete it automatically, or adopt the digital calculating equipment of the optic fibre that can detect the number of medicines.
   (4)Pneumatic system: Adopt photo electricity control and can program with PLC that make every organization of operation accurate, also enable packing the products in many worker's location and the operation at a long distance. It guarantees the stability of moving ahead simultaneously.
   (5)Photoelectric equipment: Using photoelectric indexing device makes to be clear and pleasing to print pictures and texts, and improve the level of the packing of products.
   (6)Combined body: it is convenient to enter the purification workshop already fitted up smoothly for the user.
   (7)All the parts is made of stainless steel and prevent the across infect which can meet the "GMP" standard. 

SPECIFICATIONS

TECHNICAL PARAMETERS

Productivity:  40000-100000Pieces/h

Cutting frequency: 15-40(Steplessly adjustable) Times/min

Travel adjusting range:  40-130mm

Max. of forming area and depth of PVC;240mm120mm18mm

Max. of tropic Aluminum forming area and depth:  220mm110mm20mm

Heating Plate Power(upper): 1.5(top)KW,1.5(b)KW

Hot-sealing power of Alum.-Plastic:3KW

Hot-sealing power of tropic Aluminum:7KW

Power of main motor:2.2KW

Capacity of air compressor: 0.2m3/min 

Size of wrapper(width) PTP Alum.foil PTP:250mm

 Tropic Aluminum: 250mm

Overall size:4600mm750mm1650mm

Size of encasement:2400mm750mm1650mm,22007501650mm

DPR-160A Tropical(al/pl/al) Blister Packager

Go top

INTRODUCTION
 
   DPR-160A Tropical (AL/PL/AL)Blister Packager is the initial product in China and got two patents of the state(patent NO01239101.8,01239100.X). It can be used for three kinds of AL/PL, AL/AL, AL/PL/AL different packaging and up to the purpose that a machine three uses .The machine have got appraisal of new products achievement of ZheJiang province in Nov. 2001; obtained the title of national- level key new products in July of 2003obtainedsecond prize of scientific and technological progress of Wenzhou city" in December of the same year. Our machines were already used by every large pharmaceutical factory at home and exported to America and Europe, and also got users' favorable comment at present.
     Characters are following:
     (1) Mechanical drive: The advanced three-ring decelerator was adopt in the machine instead of the worm drive, it concentric with the principal axis to decrease the error of the transmission.
     (2) Electric apparatus system: Adopting German Siemens PLC controlling system result in that every engineer location of transmission of the machine is procedure.
     (3) Detection system: adopt video
     detector that can modify of the 5% different pharmaceutical sample of the shape and delete it automatically, or adopt the digital calculating equipment of the optic fibre that can detect the number of medicines.
     (4) Pneumatic system: Adopt photo electricity control and can program with PLC that make every organization of operation accurate, also enable packing the products in many worker's location and the operation at a long distance. It guarantees the stability of moving ahead simultaneously.
     (5) Photoelectric equipment: Using photoelectric indexing device makes to be clear and pleasing to print pictures and texts, and improve the level of the packing of products.
     (6)Combined body: It is convenient to enter the purification workshop already fitted up smoothly for the user.
     (7) All the parts is made of stainless steel and prevent the across infect which can meet the "GMP" standard.

SPECIFICATIONS

TECHNICAL PARAMETERS

Ltem

Unit

Specification

Productivity

Pieces/h

28800-72000

Cutting frequency

Times/min

20-30(Steplessly adjustable)

Travel adjusting range

mm

40-120

Max. of forming area and depth of PVC

Mm

15012018

Max. of tropic Aluminum forming area and depth

Mm

14011020

PVC forming power(upper)

Kw

1

PVC forming power(lower)

Kw

1

Hot-sealing power of Alum.-Plastic

Kw

1.2

Hot-sealing power of tropic Aluminum

Kw

1.2

Power of main motor

Kw

1.1

Capacity of air compressor

m3/min

0.2

Size of wrapper(width)

PVC Medical PVC

mm

160

PTP Alum. foil PTP

mm

160

Tropic Aluminum

mm

160

Overall size

mm

43127001400

Size of encasement

mm

22007001400

mm

20007001400

DPP-320 Blister Packager

Go top

INTRODUCTION
   Main Functions & Characters:
   1.Adopting imported frequency conversion to adjust speed, whose punching frequency is 15-16 times/min and its frequency conversion can be adjustable. Choose the length of stroke and proper punching frequency according to different material.
   2. Adopting combination mode for the whole machine: putting together, formation, and material feeding are in one section; heat sealing, creasing and punching are in one section, which can be easy to enter the lift and transformation workshop, lengthen the distance between the formation and heat sealing, raise the filling rate for feeding of foreign matter. Thus, the rate of finished products will be guaranteed under the high speed running.
   3. Mechanism of Executing Drawing: composed of material delivering, drawing and position, waste collecting and so on.
   4. Enlarge its cam to lengthen the distance between up and down running of work-site, which can make the max depth of bubble reach 26mm and satisfy the big pills and special packing requirements in medical appliances, foodstuff trades and so on.
   5. This machine can produce 5 boards at one time (standard 8057mm), greatly improved the packing quality.
   6. It can be provided with photoelectric register device to perform picture & characters line-up. It can also be provided with controlling devices for pill (slice) lacking test and waste plate rejecting system.
   7. This machine can be used as two kinds of packing: aluminum-plastic and aluminum-aluminum, being a dual-purpose machine. It can also be provided with direction adjuster for hard capsules.
   8. Provided with PC touching push button, or human-computer interaction, PLC programming controller.
   9. This machine meets all the requirements of GMP standard fully.
 10. Without punching mechanism for across side, this machine can save packing materials of about ¥ 65000 Yuan/set yearly.


SPECIFICATIONS

TECHNICAL PARAMETERS

Item

 Specification

Cutting frequency

15-60time/min

Cutting Frequency

75-300Steplessly adjustable

Max. forming depth

26mm

Max. forming area

305150mm

Travel adjusting

40~160mm

Heating plate power

1.5Kwup,1.5Kwdown

Hot-sealing power or Alum.-Plastic

3Kw

Power of main motor

2.2Kw

Capacity of air compressor

0.3m3/min

Size of wrapper

PVC

320mm

PTP Alum.foil PTP

Overall size

30009501530mm

Weight

1800Kg

DPP-140D Blister Packager

Go top

INTRODUCTION
    This kind of machine is the newest product which specially designed for pharmaceutical factoriesIt is characterized by novel outlineconvenience of operationcomplete performances Adjustable travelsimpleness of changing of moldsIt gets credit for products of high quality
    The main process such as heatingpressure formingdouble feedinghot-sealingbatch numberimpressing disjunction linecounting and cutting are automatically completed continuouslyIt can be designed to do super depth blister packing (egBig honeyed pill) according to user's requirements and also line mesh hot-sealingIt has smooth and visual process. It is suitable for blister packing for various capsulestablets and other medicines.

SPECIFICATIONS

TECHNICAL PARAMETERS

Cutting frequency

40-80 plates/min

Productivity

 36,000-72,000 pieces/h

Max.forming area

130mm100mm

Max.forming depth

18mm

Adjusting range of travel

40mm-110mm

Size of standard plate

8057mm

Width and thickness of PVC and PTP Alum Foil

PVC1400.25-0.5mm PTP1400.02-0.03mm

Power supply

220V 50HZ

Power

2.4kw Main motor 1.1kw, heating power 2.4kw

Overall size

20206501400

Size of emcasement

22007001700

Weight

750KG

GBZ-130C Automatic Packager

Go top

INTRODUCTION
    This machine is designed and made by ourselves that we refer to the foreign advanced feature of packaging equipment and integrating the situation of China. This machine adopts computer-controlled system in whole journey. For reaching and controlling the temperature, seal cutting, transmission, supplying material, automatic packaging. It adopts safe automatic protector device. The host computer uses adjusting and controlling the system with frequency conversion, accurately. The project organization of the complete machine is compact, simple to operate and convenient to maintain .It is the ideal packaging equipment for little box transparent membrane packaging It has not only improved the product grade and also increased the added value of the products, and expanding the market sale.
   This machine can be used extensively suitable to pack articles for a little box of transparent membrane packaging, plays a role in seal, damp proof, and beauty. .For instance cigarette, poker, transparent soap, small medicine box and daily smalls, electron, health products. Chemical products, medicine, etc.

SPECIFICATIONS

TECHNICAL PARAMETERS

Packing material: BOPP film, heat seal shrink film

Packaging speed: 30-100 parcels/min

Packaging size(mm): length60-130,width40-100,thickness10-40

power source: 220V 50HZ

Total power: 3KW

Whole machine's weight: about 750Kg

Appearance size(mm): 2000x700x1450

GBZ-300A Automatic Packager

Go top

INTRODUCTION
    The automatic packager of transparent of GBZ-300A which our factory produced collects machine electricity and air process of integration .With computer control system of the apolegamy. It adopts the servo electrical motor to give the material, seals and cuts synchronously and accurately runs steadily. It makes temperature controlling seals cutting, material transmission, automatic packaging, automatically control integrative. The project organization of the complete machine is compact and it is simple to operate, convenient to maintain. It is the ideal packing machine for the box holding articles.
    Its main electrical motor is imported from German encloses the gearbox, the imported servo electrical motor, and other pneumatic components and parts. Thus it makes the machine steadier, perfect, guarantees to lengthen the service life of this machine.
This machine is extensively suitable for all kinds of external packaging, playing a role in seal, damp proof, beautiful, It can replace medium packaging and economized large quantities of resources and produces, packing costs. It generally used in the article packaging in such trade every large pharmaceutical factory, food factory, medical equipment, daily smalls, electronic products, health products, chemical industry and tobacco, etc.

SPECIFICATIONS

TECHNICAL PARAMETERS

Packing material: BOPP film, heat seal shrink film

Packaging speed: 25-40 parcels/min

Packaging size(mm): length45-300,width40-190,thickness10-40

power source: 380V 50HZ

Total power: 2.5KW

Whole machine's weight: about 750Kg

Appearance size(mm): 2050x1000x1900

Series of  YJD  Capsule Directional Head-Turned Machine

Go top

INTRODUCTION
    It is a highly sophisticated product with international advanced level in result of retrial and researching of our technicians. It is adopted with mechanical driving and cylinder controlling structure to make capsules collocaging according to the colors, thus it can make the packing more regular and more good-looking to enharce The products rank. It also plays a forgery preventing role.
   This machine can be coupled with any blister packaging machine. Through special design. The capsule can be packed with double-color turned.

SPECIFICATIONS

TECHNICAL PARAMETERS

Model YJD-140

Model YJD-250

Capacity (10 thous pics/h)

2-11

3.5-23

Suitable capsules

0#.1#.2#.3# hard capsule

0#.1#.2#.3# hard capsule

Pressure air (Mpa)

0.4-0.6

0.4-0.6

Overall dimensions (mm)

520x460x600x(LxWxH

720x560x740x(LxWxH)

Weight (kg)

70

130

 

© 2005 Suntin MediPharma Co. Ltd. All rights reserved.

H.K.ADD.: RM. 1213, World-wide industrial centre, No. 43-47 Shan Mei Street, Fotan, New Territories, HongKong.
Tel: +852 2690 9351 
Fax: +852 2690 9356
Email:sales@suntinpharma.com
Shenzhen Office: RM.2501-2502, 25/F., Convention & Exhibition Times Center, 3008 Yitian RD., Shenzhen China.
Tel: +86 755 8386 5062 
Fax:  +86 755 8386 4173
Web:  http://www.suntinpharma.com