Click here to home!

Set of equipments of cream vacuum emulsification
  TZGZ Series vacuum emulsifying mixer complete set

 

TZGZ Series vacuum emulsifying mixer complete set

Go top

  INTRODUCTION
    The equipment is suitable for emulsification of the pharmaceuticals , cosmetic, fine chemical products, especially the material having high matrix viscosity and solid content. The equipment is made up with the pretreatment boiler, main boiler, vacuum pump, hydraulic pressure and electric control system. The material in the water boiler and oil boiler is extracted into the main boiler by vacuum for mixture, isotrope and emulsification after completely dissolving. The isotropic and emulsifying device in the main boiler are made up with the low-speed mixer and high-speed isotropic emulsifier.

SPECIFICATIONS
    The low-speed mixer is made up with the flap mixer in the middle and the frame mixer for the high-viscosity material. Around the frame mixer, the scraper for scraping the wall is equipped. Function of the scrapper is that there isn’t any dead angle between the wall of the container and the material. The high-speed isotropice mulsifier consists of a high rotating impeller and a stator with radiating diversion groove. The impeller is so designed that the upper and lower vanes rotate at a high speed, which suck in the material respectively and then project it centrifugally. Since the gap between the impeller and the stator is very small, the material will experience a series of strong physical reaction such as shearing, pressing, mixing and injecting, so much as that the mixed material can be thoroughly emulsified. The low-speed mixture is converse and rotates to the left with the same speed, so finally the material in the container circulate constantly from up to down for mixture, decentralization, isotrope and emulsification.

    Having the above unique isotropic and emulsifying devices, it can completely homogenize, emulsify and mix the material having the viscosity of more than 50000cp in the shortest time. Emulsification happens in the super-low negative pressure (0.093Mpa), so the air bubbles brought in the course of high-speed isotrope and emulsification, will be sucked by the vacuum in order to completely emulsify the material.

TECHNICAL PARAMETERS

Model

100

200

350

蒸气、电加热二种

Capacity

100L

200L

350L

溶解罐

0.55KW

0.75KW

1.5KW

减速机

刮板搅拌器

(10-100r/min)1.5KW

1.5KW

1.5KW

变频调速

均质搅拌器

(0-3500r/min)3KW

3KW

4KW

变频调速

热水罐

100L

200L

300L

电加热

真空泵

1.45KW

1.45KW

1.45KW

水环式

转子泵

1.5KW

1.5KW

1.5KW

无级调速

热水泵

1.5KW

1.5KW

1.5KW

离心式

液压系统

1.5KW

1.5KW

1.5KW

电磁控制

Dimensions of machine (L×W×H)

2000×850×2150

2000×850×2250

2000×1000×2400

锅盖未开

2000×850×3050

2000×850×3150

2000×1000×3300

锅盖升起

 

© 2005 Suntin MediPharma Co. Ltd. All rights reserved.

H.K.ADD.: RM. 1213, World-wide industrial centre, No. 43-47 Shan Mei Street, Fotan, New Territories, HongKong.
Tel: +852 2690 9351 
Fax: +852 2690 9356
Email:sales@suntinpharma.com
Shenzhen Office: RM.2501-2502, 25/F., Convention & Exhibition Times Center, 3008 Yitian RD., Shenzhen China.
Tel: +86 755 8386 5062 
Fax:  +86 755 8386 4173
Web:  http://www.suntinpharma.com